Standard chassis max length and width 11”.
Special order for anything that is larger.
Custom-made Chassis.
Three styles to choose from:
Standard chassis max length and width 11”.
Special order for anything that is larger.
Choose which chassis style and material you want. All three styles can be made with a slope.
Aluminum .05
Steel .0478 (18 gage)
Figure out what size chassis you will need. (L∙W∙H) with Slope (L∙W∙R∙F)
The program below is not needed if you just want a blank chassis.
Download this free panel design program (front-panel.exe) from any of these sites.
Use the program to place and position the holes you will need for each panel.
The last two sites are the newer version of the program. 4.0
(front-panel.zip) (front-panel.exe)
(www.tech-systems-labs.com/program-files/front-panel.exe)
(www.frontpanelexpress.com)
(www.schaeffer-ag.de/en/download/front-panel-designer.html)
You may draw and position all the holes you will need freehand. You can email or fax
the artwork to us. mac@bowl-tronics.com Fax # 847-741-0914
When using the program, make a design for each panel.
Front Bottom Rear
The size of each panel will also tell us the size of your chassis.
Make a new folder called chassis. Save a copy of each panel file naming them front, bottom, rear, lside and rside.
Save each file into the new folder. Email a copy of the files to us along with the chassis order form.
We will email back the price and estimated time of delivery. Please call if you should have any questions. 1-800-346-3153
Hole punching cost $5 for setup and .15 cents each hole.
New Customers use Chassis credit card order form when confirming your order.
Open account customers will use chassis order form when confirming your order.
Important!!
All holes are viewed as seen by the front of the Chassis. Make sure you give yourself enough room for components
that mount on the front and rear panels. You do not want them to be butting into circuit boards, transformer or any other
component you mount inside the chassis.All chassis are made from raw material. The steel chassis will have to be painted
or coated to prevent rust. The aluminum can be painted or used as is.